Outdoor solar wall lamp with PIR sensor - 1W (2x0.5W) - IP44

This outdoor solar wall light is designed to be installed in patios, gardens, terraces or any outdoor space with access to sunlight.

It has an IP44 degree of protection, which makes them resistant to external factors such as humidity and dust.

Its operation is very simple, the solar panel incorporates a light sensor, so that during daylight hours, the panel is powered and charges the integrated battery. When the light sensor detects that night has begun, it automatically turns on the luminaires, according to the selected operating mode.

The luminaire button must be pressed to change the operating mode:

• Sensor+OFF: The luminaires will turn on at 100% capacity when the sensor detects motion and will automatically turn off 20 seconds after no presence is detected.

• Sensor+Slight Light: The luminaires will turn on at 100% of their capacity when the sensor detects motion and after 20 seconds of no presence detected, the brightness will gently dim to 20% of its capacity.

• Constant Light Mode: The luminaires will remain on, maintaining a constant brightness of 20% of their maximum capacity.

• OFF: The luminaires will remain off at all times.

Each fixture incorporates two 0.5W bulbs each, which can be fully and independently directed, according to the sector to be illuminated.

It is easily installed on the wall, by fixing with plugs and screws.

It is recommended to install it in a place with access to direct sunlight and pay attention to the installation angle to ensure effective battery charging. The charging effect of the solar panel depends on sunlight, lighting time and weather conditions.

They incorporate a 3.7V and 1200mAH battery, which boasts an estimated total charging time of 4-6h and a maximum autonomy of 12h.