160º round PIR wall motion sensor
160ºmotion sensor. Detector of good sensitivity, allowing great energy savings. Automatically identifies day and night and works by infrared to detect motion.
Adjusts the ambient working light. Detection up to a distance of 8 meters, for devices up to 500W of incandescent luminaires and 200W for LED technology. Easy lighting automation sensor.
Wall sensor ideal for automating lights in stairways, corridors, garages or bathrooms almost instantly. Exclusive use for indoor use with IP20 protection degree.
Detailed Description
Infrared motion sensor switch
The PIR motion sensor is the ideal device for the correct management of energy consumption. It works in 3-wire installations. Infrared sensor ideal for replacing recessed switches and automating LED lights in those areas where movements are reduced but it is necessary to keep the light on, such as in offices, school classrooms, bathrooms, corridors, stairways, etc.
Connection diagram
Infrared sensor with 160º detection up to 8 meters, for devices or accumulation of loads up to 500W. For LED 200W. In addition, it also allows to automatically identify day and night and adjust the amount of brightness to turn on the lights.
With IP20 degree of protection, the device is for indoor use only. Easy mounting. Integrated button that allows to deactivate the PIR sensor whenever we want, in addition to adjusting the time it takes to turn on and the amount of minimum LUX.
Main functions of the motion sensor
PIR sensors activate the switch when motion is detected within the detection zone and ambient light levels fall below the threshold selected with the LUX function.
➢ Can identify day and night: The consumer can adjust the ambient working light. It can work day and night by adjusting the amount of LUX. With a maximum of 2000Lux and a minimum of <3Lux.
➢ Time setting: It can be adjusted according to the consumer's desire. The minimum time is 10sec±3sec. The maximum is 7min±2min.
➢ The switch: from left to right is "OFF"、"PIR". "ON". Allowing to turn on and off the PIR system whenever we want.
Technical characteristics of the presence sensor.
- Power supply: 220-240V-AC
- Frequency: 50Hz
- Dimensions: 80x80x65mm
- Ambient light: from <3-2000 LUX (adjustable)
- Actuation time: minimum 10 seconds+/-3 seconds.
- Maximum load: 500W. For LED 200W
- Detection distance: maximum 8 meters.
- Detection range: 160º.
- Operating temperature: from -20ºC to +40ºC with relative humidity below 93%.
- Recommended installation height: from 1-1.8m.
- Motion detection speed: 0.6 to 1.5 meters/second.
