DMX decoder DMX-SPI Signal converter for LED strips
DMX DMX-SPI Decoder for LED Strips
DMX DMX-SPILED strip decoder. It is an advanced control unit that offers stand-alone operation and connection to an external device, receiving the DMX-512 digital control signal. It allows us to control and amplify 12V RGB LED strips in any way, creating a dynamic light effect and changing the light intensity.
It has a wide voltage operating range (5V~24V). With intelligent IC chip, the decoding channel is adjustable. It contains 99 kinds of built-in patterns. It can be used as a synchronous controller, can synchronously control LED lights. It works in synchronous or multiple cascade mode.
Decoder Features
- DC5V~24V. Wide range of working voltage.
- Built-in IC mode/speed/channel decoding speed/channel adjustable.
- Automatic DMX512 signal identification.
- Compatible with addressable pixel LED and 5-channel RGBWW LED.
- Works in single or multiple synchronous cascade mode.
- With 99 kinds of built-in patterns.
- Saves the configuration.
Functions of each port
IN |
DMX + | DMX - | GND |
DMX 512 input signal + | DMX input signal - | Ground |
OUT |
DMX + | DMX - | GND |
+ DMX512 signal cascading pole to next decoder | - Signal cascade pole to the next decoder | Ground |
Digital Tube |
Display "P---01 | Display "S--05" Display "S--05 | Display "C--01" |
Indicates that it is selected for mode 1, and so on. | Indicates that it is selected for speed 5, and so on. | Indicates that the selected channel is 01, then it will decode the DMX512 signal of channel 1. |
BUTTONS | Refer to the operating instructions below. |
CLK | Addressable LED clock signal output. |
DATA | Addressable LED data signal output. |
VCC | Power (+) |
GND | Ground (-) |
CH1-CH5 | 5 channels of contractible PWM signal output. |
Operating Instructions
BUTTONS | FUNCTIONS |
MENU | Press the button to select between IC/ Mode (P)/ Speed (S)/ Channel (C) modes. |
UP | In IC, P and S modes to increase the parameter quickly press and hold the button. In channel selection mode, press and hold to edit the digits, in tens, hundreds or thousands, from right to left. |
DOWN | In IC, P and S modes to quickly decrease the parameter, press and hold the button. In channel selection mode, press and hold to go backwards in digits. |
Wiring connection
DMX 512 (Digital Multiplex) is used for LED lighting control. It uses channels for transmitting commands to fixtures with 3 to 5 pin wires, with very high data transmission. Each DMX channel controls a specific effect and parameter. It controls the intensity, color, movement, etc. of the LED strips. It can be controlled through software (PC) or mixer and with cascade connection.
ROHS
Questions
No customer questions for the moment.