24V-DC IP20 LED strip for indoor use - 10mm wide - 30 meter roll

This LED strip is powered by a 24V DC source. It incorporates a small chip that compensates for voltage drop, allowing for custom installations with more than 10 linear meters, where standard 12V or 24V strips are insufficient.

If using the entire roll (30 m), it is recommended to power the LED strip from both ends (start and end). For lengths up to 15 m, powering from only one end is sufficient.

It is designed according to the highest quality standards, incorporating state-of-the-art LED technology that allows it to emit a very powerful and homogeneous light.

Due to its IP20 protection rating, it is suitable for indoor use.

High power and low consumption

It has a power of 10W/m.

It also features a total of 3600 SMD2835 LED chips and a density of 120 chips/meter.

It features a 120° beam angle and a high color rendering index, CRI>80, which allows it to reproduce colors very similarly to natural light.

Easy installation and handling

The LED strip comes in a 30-meter roll. It can be cut every 100mm, according to the markings provided. The strip is 10mm wide and has 3M self-adhesive backing for easy attachment to the desired surface.

Recommended use for LED strips

Interior lighting in general

Lighting for display cases, shelves and shop windows

Decorative indoor lighting

Architectural lighting in interiors

Any assembly that requires long runs at low voltage.

Lighting of large illuminated signs.

Please note that certain technical specifications, such as power or efficiency, may vary depending on the product's color/shade. For more precise information, please consult the test reports attached in the "Downloads" section, or contact our sales advisors.