LED Tube 120cm T8 - 18W - 140 lm/W

18W 120cm T8 LED Tube Light - High Efficiency, Uniform Light and Low Power Consumption

Designed to replace 120cm fluorescent lamps, this T8 LED tube offers an efficient and durable lighting solution, with an efficiency of 140 lm/W and an opening angle of 330°.

• Available in warm white (3000K), neutral (4000K) and cool white (6000K).
  
  
• High brightness SMD 2835 chip.
  
  
• Glass and opal plastic coating: more than 90% light transmission.
  
  
• No glare and with protection against short circuits and overheating.
  
  
• Compatible with ferromagnetic and electronic ballasts (bridge included).
  
  
• Prolonged lifetime and maintenance savings.
  
  
• Applications: Perfect for offices, corridors, stores, kitchens or closed parking lots.

Installation in ferromagnetic ballasts:

Step 1: Turn off the light at the main switchboard and check that no electric current is coming.

Step 2: Remove the old tube and then the starter.

Step 3: Put the new LED starter bridge (included with each tube).

Step 4: Remove the capacitor or capacitor (to avoid overvoltage).

Step 5: Install the new LED tube.

Installation on Electronic ballasts:

Step 1: Turn off the light at the main electrical panel and verify that no electric current is coming.

Step 2: Remove the old tube (in this case there is no starter, since it is incorporated inside the electronic ballast).

Step 3: Disconnect the wires that enter the electronic ballast (no need to remove it, just disconnect it electrically).

Step 4: Choose one of the 2 tube holders to connect its 2 wires directly to the mains.

Step 5: We recommend marking the lamp holder where the connection has been made to facilitate the installation of the LED tube.