PIR motion sensor for BFLS outdoor LED floodlights - Sensor series - IP65
PIR motion sensor for BFLS outdoor LED projectors. Turns the projector into an automatic light that switches on when it detects movement, without additional wiring.
• Compatible with BFLS-10W-N, BFLS-20W-N, BFLS-30W-N and BFLS-50W-N
• 120° detection angle and adjustable range from 4 to 10 m
• Adjustable delay of 7 to 8 minutes and ambient light control <10–2000 lux
• 8h permanent timer that can be activated from the switch
• IP65 protection for outdoor use
Detailed Description
The BFLS LED projector's PIR motion sensor attaches directly to the luminaire's plug-in adapter, transforming it into a presence-sensing lighting system. It offers three independent settings (sensitivity, time, and ambient light) to suit any outdoor space.
Main advantages
- Plug-in installation: it connects to the adapter and is secured with its nut, without cables.
- SENS adjustment: adjustable range from 4 to 10 m depending on the environment.
- TIME setting: the light stays on for 7 to 8 minutes after the last detection.
- LUX setting: night-only operation or day-only operation, as you prefer.
- Extendable delay: each new detection resets the power-on time.
Where is it used?
For facades, entrances, garages, patios, gardens, passageways, and perimeters of warehouses or storage facilities where lighting is only desired when there is movement. An installation height of 1.8 to 2.5 m is recommended.
Which projectors is it compatible with?
Exclusively compatible with BFLS series LED projectors - Sensor series equipped with a plug-in adapter: BFLS-10W-N, BFLS-20W-N, BFLS-30W-N and BFLS-50W-N . The sensor is powered from the luminaire's own adapter ( DC 5V ).
Can I leave the light on without it depending on the sensor?
Yes. Switching the light off and on within 3 seconds activates the permanent timer : the light stays on for 8 hours (±15%) and then automatically returns to detection mode. To deactivate it sooner, simply cut off the power for more than 5 seconds.
How do I check that it's working correctly?
Set TIME to minimum, SENS to maximum, and LUX to the sun position. When connected, the light will turn on for about 10 seconds (warm-up) and then respond to movement. If you test it during the day with LUX in the moon position, the load will not react: this is normal behavior.
What influences the detection range?
The range depends on the installation height and ambient temperature: it decreases in warm weather and increases in cold weather. The sensor detects movement best at speeds of 0.6 to 1.5 m/s , so it should be pointed towards the area where people frequently pass through.
PIR motion sensor for BFLS outdoor LED floodlights - Sensor series - IP65
RELATED PRODUCTS
