Edge-lit LED light BAR 50cm 15W 24V-DC linkable for light box backlighting

Rigid LED strip for backlighting of backlit light boxes 15W 24V IP65

Rigid aluminum bar with LED modules mounted on its surface, for side mounting in double-sided backlit light boxes. Its lateral installation, together with the 45º x 15º asymmetrical optics allow a correct diffusion and use of the light beam over the entire surface of the cube, without shadows or dark areas.

Built with 3535 CREE XTE LED chip in warm white 3000K and cold white 6000K with high efficiency (120 lumens/W). The chips are 11cm apart, and thanks to the 45º lateral angle, they allow to cover a larger lighting surface with fewer chips, less consumption and less heat in the whole set, with the consequent energy saving and extending the product's useful life. In this way, it would be sufficient to place the bars on 2 of the four sides of each cube.

The design of the optics is designed to cover a distance of up to 1.80 meters, and with 4 bars of 50cm it is possible to illuminate up to 1m2 of light cube.

The connection between bars is made via the male / female start and end cable, which easily interconnects up to 20 50cm bars with only 1 power supply. The set requires a 24VDC power supply and adequate power to cover the consumption of the set.