90cm T8 LED Tube - 14W - 140 lm/W

T8 LED Tube 90cm 14W - High Efficiency, Uniform Light, Low Power Consumption

Designed to replace 90cm fluorescent lamps, this T8 LED tube offers an efficient and durable lighting solution, with an efficiency of 140 lm/W and an opening angle of 330°.

• Available in warm white (3000K), neutral (4000K) and cool white (6000K).
  
  
• High brightness SMD 2835 chip.
  
  
• Glass and opal plastic coating: more than 90% light transmission.
  
  
• No glare and with protection against short circuits and overheating.
  
  
• Compatible with ferromagnetic and electronic ballasts (bridge included).
  
  
• Prolonged lifetime and maintenance savings.
  
  
• Applications: Perfect for offices, corridors, stores, kitchens or closed parking lots.

Installation in ferromagnetic ballasts:

Step 1: Turn off the light at the main switchboard and verify that no electric current is coming.

Step 2: Remove the old tube and then the starter.

Step 3: Put the new LED starter bridge (included with each tube).

Step 4: Remove the capacitor or capacitor (to avoid overvoltage).

Step 5: Install the new LED tube.

Installation on Electronic ballasts:

Step 1: Turn off the light at the main electrical panel and verify that no electric current is coming.

Step 2: Remove the old tube (in this case there is no starter, since it is incorporated inside the electronic ballast).

Step 3: Disconnect the cables that enter the electronic ballast (no need to remove it, just disconnect it electrically).

Step 4: Choose one of the 2 tube holders to connect its 2 wires directly to the mains.

Step 5: We recommend marking the lamp holder where the connection has been made to facilitate the installation of the LED tube.