LED Strip 24V-DC - 9W/m - single color - 10mm - IP20 - Roll 50 meters - 60 chips/m - Cutting c/10 cm
Single color LED strip at 24V DC for indoor use in roll of 50 meters.
It incorporates high quality SMD2835 LED chips with a density of 60 chips/meter, giving it a power of 5W/m for neutral and warm white and 9W/m for cool white.
It can be cut every 10 cm, making it very versatile for different lighting projects. Thanks to its high color rendering index, CRI>80, it reproduces colors faithfully, similar to natural light.
It is dimmable and is available in warm white (2700K), neutral white (4000K) and cool white (6500K).
It incorporates a chip that avoids voltage drop, allowing longer assemblies than other low voltage LED strips.
Detailed Description
LED strip 24 V DC - IP20 for indoor use - Width 10 mm - Roll 50 meters
This LED strip is powered by a 24V DC source. It incorporates a small chip that compensates the voltage drop and thus allows custom assemblies in installations with more than 10 linear meters, where the standard 12V or 24V strip is not enough.
In case of using the complete roll (50 m), it is recommended to feed the LED strip on both sides (start and end). Up to 15 m it is sufficient to feed from one end only.
It is designed according to the highest quality standards, incorporating the latest generation LED technology that allows it to emit a very powerful and homogeneous light.
Due to its IP20 degree of protection, it is suitable for indoor use.
It has three color temperature variants, according to the needs of the space and the atmosphere we want to create: warm white (2700 K), neutral white (4000K) and cool white (6500K).
High power and low consumption
It has a power of 5W/m for neutral and warm white and 9W/m for cool white. It also has a density of 60 chips/meter.
It has a beam opening angle of 120° and a high color rendering index, CRI>80, which allows it to reproduce colors very similar to natural light.
Easy installation and handling
The LED strip comes in a roll of 50 meters. It can be cut every 100mm, according to the indicated markings. The width of the strip is 10mm and has a 3M self-adhesive backing to adhere to the desired surface.
Recommended use for LED strips
Indoor lighting in general
Illumination of showcases, shelves and shop windows
Indoor decorative lighting
Indoor architectural lighting
Any assembly that requires long runs at low voltage.
Lighting of large illuminated signs.
| Main characteristics of the product:
|
Please note that certain technical characteristics such as power or efficiency may vary according to the color/shade of the product. For further details, please refer to the attached test reports in the "Downloads" section, or contact our sales advisors.
LED Strip 24V-DC - 9W/m - single color - 10mm - IP20 - Roll 50 meters - 60 chips/m - Cutting c/10 cm
