LED Strip 12V-DC 70W 10mm ultraviolet IP20 (SMD5050 60ch/m) 5 meter roll

ULTRAVIOLET LED Strip - Black Light

The UV LED Strip emits "black light" with ultraviolet electromagnetic radiation, they are manufactured with Wood's glass to highlight fluorescent colors.

The LED strip is an element that integrates into your projects with minimal visual impact, creating an indirect and diffuse lighting that highlights the architectural elements.

SMD5050 LED strips are medium/high power and low consumption. Average consumption is estimated at 14 W/m. They can be cut every 50mm, allowing them to be adapted and spliced according to the needs of each project.

Installation:

The LED strip comes supplied with 3M self-adhesive tape on the back. Place it on a smooth, non-porous surface and make sure to clean it beforehand. As a flexible strip, it can be used in tight bends. Mounting against the power supply can be done using connectors or by soldering the cable directly to the power supply.

For a complete LED strip installation you will need a controller, a power supply and, optionally, aluminum profiles (surface or recessed). It is estimated that for 12V LED strips, if you want to make stretches longer than 5 meters, you will need to install additional power supplies and signal amplifiers, to avoid voltage drops.

Recommended uses:

• Highlighting architectural contours.

• Lighting under furniture and shelves, showcases, showcases

• Aisles, shop windows, with indirect lighting.

Black light applications:

- Leisure premises: discotheques, music bars, recreational areas.

- Authentication of tickets and passports.

- Indoor crops.

- Ideal for highlighting fluorine and white colors.

Technical Installation of Ultraviolet strips:

1. The installation surface must be smooth, clean and dry.

2. The LED component part cannot be fixed on the surface of a sharp edge.

3. The black light LED strip must not be knocked or stepped on.

4. The UV LED strip can be cut along the marked cutting lines, every 5cm.