Dual white CCT controller for LED strips with RF touch panel - 5-24V/DC

This CCT LED strip controller is compatible with most 5V to 24V CCT LED strips with a maximum current of 10A.

The wall mounted touch panel features a stable capacitive touch screen with high quality LED dimming.

It allows a gradual control of brightness from 0 to 100% (Brightness+ and Brightness- keys) and color temperature with the gradual circle in the center, where you can switch from warm to cool white. It is also possible to choose the cool white shade with the upper left key (black bar) and for warm with the next key (orange bar).

It offers the possibility to set dynamic modes and adjust their speed, including fade, strobe and flash. Settings are retained when the lights are turned off.

By using RF, it works wirelessly, so it does not require changing any existing electrical circuits. The control distance is 15 meters.

The panel also offers two easy ways for wall installation: using the double-sided adhesive tapes (included), or using two screws (not included). It is powered by a 3V CR2025 battery (included).

With its ultra-slim and classic design, this controller blends into any environment and allows for complete and simple lighting customization.

Note:

- Attention to the DUAL LINE OUTPUT (CW and WW), the two wires of the strip can only be connected to these two interfaces that have the marking on the controller.

- BRIGHTNESS: Brightness+ and Brightness- keys (Continuous Adjustment)

- SPEED: Speed+ and Speed- key (8 levels)

Code to pair the strips:

- Long press the Cool White key within 5 seconds of turning on the remote and the light bar will flash slowly for 3 times.

Code to clear the strip pairing::

- Long press and hold the Warm White key within 5 seconds after the controller is turned on and the light bar will flash rapidly for 3 times.