Solar LED bollard with stake "FELICE 200 SPIKE" 18cm with PIR sensor - 3 modes of operation - CCT

Solar bollard "FELICE 200 SPIKE" - 18 cm - with stake

The solar bollard with stake has IP55 degree of protection, so it is suitable for outdoor installation, being resistant to external factors such as dust and humidity.

It is equipped with an opal diffuser made of polymethylmethacrylate (PMMA), resistant to damage by ultraviolet radiation. Its structure is made of shockproof resin, resistant to oxidation, corrosion and UV rays, just like all FUMAGALLI products. Once installed, it requires no maintenance.

It incorporates a PIR motion sensor and automatic on/off system. It has three operating modes and the possibility of regulating the color temperature between warm white, neutral white and cool white, thanks to its CCT system.

This solar bollard is ideal for lighting paths, terraces, patios or gardens. It can be easily moved because it does not require electrical installation. The assembly is very simple and is done by driving the stake into the ground, planter, lawn or sand. Its spike, 180 mm deep allows an easy and firm fixation.

Operating modes

- Summer mode: solar luminaire on at 15%. When motion is detected, it turns on at 100%. After 25 sec. it returns to its initial illumination.

- Winter mode: solar luminaire on at 7%. When motion is detected, it turns on at 100%. After 25 sec. it returns to its initial illumination.

- Motion sensor mode: solar luminaire off. When motion is detected, it turns on at 100%. After 25 sec. it returns to its initial illumination.