120° Motion Sensor Socket IP20
Motion Sensor Socket
The sensor so cket switches on when it detects motion within its detection field (2-9 meters), saving a lot of energy. passive infrared (PIR).
Installation is very simple. The plug can identify day and night automatically. The PIR detector is activated by detecting the temperature change within its range and switches on.
This type of socket can be installed on interior walls, at entrances and exits, in passage areas, etc. Providing convenience, safety and energy savings.
It controls any device plugged in through the motion sensor, with a multitude of applications.
Specifications of the detector plug
- Power source: 220-240V/AC
- Detection angle: 120 degrees
- Adjustable brightness: 3-2000lux.
- Power frequency: 50Hz
- Adjustable power-on time: 10s-7min.
- Motion detection speed: 0.6-1.5m/s.
- Power consumption: approx.0.9W.
- Rated load: Max. 300W (LED), 1200W (Incandescent).
- IP20 protection rating.
Socket function
- It can identify day and night: You can adjust the working status in different light environments. When set to "sun" the brightness will be maximum, when set to "moon" the brightness will be less than 3lux.
- Adjustable sensing distance: It can be adjusted from 2m to 9m, according to the needs.
To use the sensor socket fix the socket in the place where you want to install it. After installation connect the LED lamp and you are done.
ROHS
Questions
No customer questions for the moment.