LED Strip 24V-DC 10W/m SMD5050 IP68 20 meters Roll

20 METERS ROLL OF 24V-DC 10W/M PLASTICIZED IP68 LED STRIPS

Novel 24V-DC IP68 silicone LED strip, built with SMD5050 chip, will allow you to make custom assemblies in longitudinal runs where the standard 12V or 24V strip is not enough, especially in installations beyond 10 linear meters.

Its construction, with a 12mm PCB and a 14mm siliconized coating, makes this LED strip the perfect solution for high quality and resistant outdoor installations. Its included waterproof connectors allow you to make the necessary splices quickly and easily. Its high quality silicone coating does not crack, does not yellow, ensuring its durability over time.

You will be able to light up to 40 meters, with a single power supply in the center, according to the following scheme:

IP68 degree of protection. One of the best quality LED strips on the market. Robust, without annoying flickering and with a homogeneous illumination in all meters that allows its installation. The SMD 5050 chip provides high intensity and durability. It can be cut on the cut marks, marked on the LED strips. Ultra-bright, with low power consumption and high heat dissipation.

These LED strips are waterproof, so they can be installed both outdoors and indoors. The installation of these LED strips is very simple and stands out for being able to offer a uniform LED lighting, using only one power supply in 40 meters. With a beam opening angle of 120 degrees.

Technical features:

• SMD5050 LED chip - 60 chips/meter.
• Warm white 2700K / Cool white 6000K / RGB
• Nominal power: 10W/meter
• Voltage: 24V
• Coil length: 20 meters
• IP68
• PCB width: 12mm
• Total width: 14mm including silicon coating
• Cutting distance: 100mm
• Frequency: 50/60 Hz
• Waterproof connectors included
• No self-adhesive included, staple / profile mounting.

Applications:

• Architectural lighting
• Building contours and canopies
• Decorative lighting of high humidity areas
• Contours of swimming pools, lakes and ponds
• Illumination of large illuminated signs
• Any installation requiring long runs at low voltage

Cable connection Model RGB:

• Cable Black Mark > + Positive
• Cable without Color Mark > Green Channel
• Cable with Red / (Brown) Mark > Red Channel
• Cable Blue Mark > Blue Channel