Emergency light AUTOTEST - 7W - 1000lm - 3h of autonomy

LED Emergency Light with AutoTest 7W: Reliable Lighting

This LED emergency light provides backup lighting during power outages, providing visibility in emergency situations.

It is made of ABS (acrylonitrile butadiene butadiene styrene), a shock-resistant material.

It incorporates SMD5730 LED chips that ensure clear and intense illumination, even through the self-adhesive sign, with a luminous flux of 1000 lm and a cool white tone (6500K).

The light is not permanent, but turns on automatically in case of power failure and has 3h of autonomy.

An LED indicator lets you know if the device is in operation, making it easy to monitor its status.

Green light: it is working properly;

flashing green light: it is performing a self-test;

flashing red light: indicates a malfunction.

Self-test system

Indicates the status of the emergency luminaires at all times. Periodically, the unit performs two automatic tests:

Weekly test: the test lasts 2 minutes and the status of the luminaire will be reflected on the LED indicators.

Annual test: The test lasts 1 hour and the status of the luminaire will be reflected in the LED indicators.

Installation

This emergency light can be installed in two ways:

Recessed: by replacing an old luminaire or by drilling a new hole. Once the cutout and wiring connection has been made, the luminaire is easily inserted and fixed by means of its two side wings.

Surface: It only requires installation with the wiring connection on the wall or ceiling, simply and quickly. The frame that carries the luminaire for recessed installation must be removed prior to surface installation.

It includes all the necessary elements for mounting.

Precautions during installation:

1) Disconnect power during installation.

2) This product should not be installed in outdoor, humid, corrosive gas, etc. places.

3) This product should be used on a separate power circuit. It should not share circuit with lighting or other electrical equipment (with switch), to ensure that the battery can be recharged normally.

4) To ensure that the product is working normally, it should be checked periodically.

5) The product should be charged for approximately 20 hours before the first use.

6) If the product is stored or not used for a long time, it should be charged and discharged once every three months to protect the battery performance.

Applications

• Stores, businesses and offices.
• Schools and universities.
• Health facilities.
• Entertainment centers.
• Industrial facilities.
• Public places.
• Sports facilities.