LED underwater surface light for boats 120W 9-32V IP68 316L stainless steel

Underwater LED light for boats and yachts 120W steel INOX 316L

LED surface light for boats, yachts and pleasure boats. Made of marine grade stainless steel AISI 316L to avoid corrosion due to salinity of water. The PCB board incorporates high brightness and luminosity CREE LED chips in cool white 6000K, offering a luminous flux of 5900 lumens, with a reduced consumption of 120W.

The lamp can operate over a wide input voltage range of 9-32VDC, so it can be connected directly to the battery power supply circuit of most boats. Product not valid for connection to 230V. If your boat operates at 230V, you will need to install a 12V or 24V waterproof power supply.

Mounting and installation of the 120W LED underwater light for boats

The LED underwater boat light needs to be submerged at all times during operation and function. For mounting, it is sufficient to drill the hull below the waterline to screw the support bracket (sold separately) for the lamp and pass the power cable. For a correct watertightness of the assembly, you should use suitable products for this purpose, such as silicone sealants or SELLAFLEX. In any case, we recommend that you contact your assembler for advice and that the work is carried out under the supervision of a professional.

Technical characteristics of the LED surface light for boats

• Input voltage: 9 to 32VDC
• Rated power: 116.4W
• LED chip CREE single color cool white 6000K
• Luminous flux: 5900 lumens
• Weight: 860 grams
• Housing: stainless steel AISI 316L 18/8
• Dimensions: 128x80x17mm
• Optics angle: 180º
• IP68 rating

Applications of LED surface mounted boat lights

Highlight your boat, motorboat, yacht or pleasure craft with LED lights below the waterline. Enjoy a night swim at the foot of the boat and enjoy the marine wildlife and backgrounds in clear water.