3 in 1 LED strip controller - RGB - RGBW - RGB+CCT - 12/24V DC - 2.4G - MiBoxer - FUT037S+

The 3-in-1 controller allows remote control of LED strips using a MiBoxer RF remote.

The 2.4Ghz communication provides fast response, without interference. The maximum distance between the remote and the nearest controller is 30 meters.

It allows to change the output mode from "RGB" to "RGBW" and "RGB + CCT" through one button.

The installation is very simple, it's powered at 12-24V DC through a Jack connector or it can be directly connected via cable to the V+/V- ports. A maximum output current of 12A is obtained, which is usually the current at which most LED Strips on the market operate.

Supports PUSH dimming and DMX control (Only for RGB+CCT output mode, need DMX512 LED transmitter).

Also supports smartphone app control and voice control (requires 2.4 GHz gateway).

Preautions

• Verify that the voltage input of the power supply is compatible with the controller.
• Avoid using the controller in an area with a large metal suface or strong electromagnetic waves nearby; otherwise, the remote control distance may be affected.