LED Strip 12V-DC 75W 10mm single color IP67 (SMD5630 60ch/m) 5 meter roll

12V-DC 75W LED Strip with 300 SMD5630 chips PLASTICIZED IP67

• 75W 12V LED Strip

• 5 meter reel

• 60 chips/meter SMD5630

• Cutting distance 50mm

• IP67 degree of protection

• PCB width: 10mm

• Strip width: 12mm with silicon coating

• Flexible, high brightness and luminance

• Power supply required (not included)

The LED strip is an element that integrates into your projects with minimal visual impact, creating indirect and diffused lighting that highlights architectural elements.

SMD5630 LED strips are medium/high power and low consumption. Average consumption is estimated at 15 W/m. They can be cut every 50mm, which allows them to be adapted and spliced according to the needs of each project.

Choose the right color temperature

Installation of 12V IP67 Single Color 12V LED Strip

The IP67 SILICON LED strip does NOT come with self-adhesive tape on the back. The mounting must be done with aluminum profiles, or with transparent flanges for fastening with nails/screws. As it is a flexible strip, it can be used in tight curves. The mounting against the power supply can be done by means of connectors or by soldering the cable directly to the power supply. In case you want to install it outdoors, be sure to protect the soldering, cuts and splices with the necessary sealing.

For a complete LED strip installation you will need a controller, a power supply and, optionally, aluminum profiles (surface or recessed). It is estimated that for 12V LED strips, if you want to make stretches of more than 5 meters, you will need to install additional power supplies and signal amplifiers, to avoid voltage drops.

Recommended uses:

• Highlighting architectural contours.

• Lighting under furniture and shelves, showcases, showcases

• Aisles, shop windows, with indirect illumination

• Outdoor lighting, as well as bathrooms, showers, kitchens and humid environments (IP67 protection).