Emergency LED light 500lm AUTOTEST- 1 hour autonomy - IP44

This LED emergency light is a versatile product with diverse uses in different environments, such as homes, commercial buildings, stores, hotels, schools and parking lots. It provides backup lighting during power outages, ensuring safety, facilitating evacuation and providing visibility in emergency situations. It is a reliable solution to ensure safety in critical moments.

It is made of polycarbonate with an opal diffuser. It incorporates SMD LED chips that ensure a clear and intense illumination, with a luminous flux of 500lm and a cold white tone (6500K).

The light is not permanent, but turns on automatically in case of power failure and has 1h of autonomy.

An LED indicator lets you know if the device is in operation or if the battery is charging, making it easy to monitor its status.

Its IP44 degree of protection allows it to be installed in high humidity environments, even making it resistant to splashes.

Autotest System

Indicates the status of the emergency luminaires at all times. Periodically, the equipment performs two tests according to the UNE-EN 50172 standard:

Functional test: at least once a month it is necessary to simulate a power failure for sufficient time to ensure that all luminaires are switched on through the battery.

Autonomy test: At least once a year it is necessary to verify that the autonomy of each luminaire is equal to or greater than the nominal autonomy. For this purpose, a power failure shall be simulated and the batteries shall be allowed to run down.

Installation:

Recessed: including accessory reference 8550040001. The hole should measure 278x115mm. After cutting and wiring connection, the accessory with the luminaire is easily inserted and fixed by means of its two lateral flaps.

Surface: it only requires to perform the installation with the wiring connection on the wall or ceiling, simply and quickly.