LED recessed emergency light 150lm 2,5W - 3 hours IP20
The 2.5W recessed LED emergency light has an IP20 degree of protection, so it is intended to be used indoors.
Its uses are varied, being able to be installed in a recessed manner in ceilings, both at home and in any commercial premises, offices, hotels, etc..
It includes a Ni-mH battery of 3.6V and O.6Ah and has an autonomy of 3 hours.
Its LED technology allows great energy savings and excellent performance.
Detailed Description
Emergency recessed luminaire with 150 lumens and 3h autonomy.
The recessed LED emergency light includes a red pilot light with "CHARGE" indicator. If the red light is on, it indicates that the lamp is charging and the power supply is flowing properly. When a power failure occurs, the red light turns off, and the lamp will light up.
In accordance with current regulations, it incorporates a "TEST" button on the front of the lamp. The lamp activation occurs instantaneously after the interruption of the power supply, without flickering and without heating.
Technical characteristics:
✔ Integrated battery: Ni-mH, 3.6V, O.6Ah.
✔ Voltage: 230V/AC
✔ Approx. battery life: 3 hours at full charge.
✔ Luminous flux: 150 lumens.
✔ IP20
Instructions for use:
✔ Before installation, disconnect the power supply.
✔ Do not install this product in an environment of exterior doors, humidity and corrosive gases.
✔ Use only one circuit, do not connect with other lights, to ensure normal emergency recharging.
✔ Check regularly for proper operating conditions.
✔ When long-term storage or out of service, check the light condition every three months to maintain battery performance.
Installation:
The installation method of the emergency light is as follows:
✔ Open the product (turn the bottom).
✔ Use the recessed clips to recess and attach the luminaire to the hole made in the ceiling.
✔ Pass the AC cable through the hole in the lower housing and connect the main circuit board to the L and N terminals.
✔ Close the diffuser.
✔ Connect to the AC power supply.
