Single-phase recessed track for LED spotlights - 2 meter bar
2 meter bar of single-phase rail for recessed mounting. The rail has the necessary hardware and fixing screws, and can be cut to the desired size. Its design includes two external fins as trims, hiding any imperfection in the ceiling and being practically flush with the surface.
Includes start feeder and end cap ** Includes start feeder and end cap **.
- Voltage: 220-240 V
- Dimensions: 2000x50x19mm.
- IP20
Detailed Description
Single-phase recessed track for LED spotlights (2 meters)
2 meter bar of single-phase recessed track. The rail has the necessary hardware and fixing hardware, and can be cut to the desired size. Its design includes two external fins as trims, hiding any imperfection in the ceiling and remaining practically flush with the surface.
The advantage of installing rails for spotlights is the versatility obtained by having the possibility of manipulating the spotlights and moving them along the rail to where they are needed on each occasion, without great effort and without requiring an installer.
Using LED spotlights you can have a homogeneous, intense and very low consumption lighting, each two meter bar allows the installation of up to 20 spotlights of 25W!
Features of the recessed single-phase rail
- Outer dimensions: width 50mm (including fins) x depth 19mm
- Dimensions of the cut-out width for recessed mounting: 35mm
- Voltage: 220-240 V
- Maximum power: 1000 W
- Maximum current: 6 A
- Maximum length to be connected: 15 meters
- Includes fixing screws
- Includes starting power supply and end cap
- For indoor use: IP20
Single-phase recessed track for LED spotlights - 2 meter bar
