LED Strip 24V-DC - 15W/m - Monochrome - 10mm - IP20 - 30 metres - 120 LED/m - 10cm cut
Single-colour LED strip at 24V-DC for indoor use, in a 30-meter roll. It incorporates high-quality SMD2835 LED chips with a density of 120 LED/m, and a power of 10W/m (warm and neutral white) and 15W/m (cool white).
It can be cut every 10 cm, making it very versatile for various lighting projects. Thanks to its high color rendering index, CRI>80, it faithfully reproduces colors, similar to natural light.
It's dimmable and is available in warm white (2700K), neutral white (4000K) and cool white (6500K).
It incorporates a chip that avoids voltage drop, allowing longer assemblies than other low voltage LED strips.
Detailed Description
24V DC LED strip for indoor use - 10 mm width - 30m
This LED strip is powered by a 24V-DC source. It incorporates a small chip that compensates for voltage drop, allowing for custom installations exceeding 10 linear meters, where standard 12V or 24V strips are insufficient.
If using the full roll (30 m), it is recommended to power the LED strip from both ends (beginning and end). For up to 15 m, powering from one end is enough.
It's designed according to the highest quality standards, incorporating the latest generation LED technology that allows it to emit a very powerful and homogeneous light.
Due to its IP20 protection rating, it's suitable for indoor use.
It features three colour temperature variants, according to the needs of the space and the atmosphere you want to create: warm white (2700K), neutral white (4000K) and cool white (6000K).
High power and low consumption
It has a power of 10W/m in warm and neutral white, and 15W/m in cool white.
Additionally, it features a total of 3600 SMD2835 LED chips and a density of 120 LED/m.
It has a 120° beam angle and a high color rendering index, CRI>80, which allows it to reproduce colors very similar to natural light.
Easy installation and handling
The LED strip comes in a roll of 30 metres. It can be cut every 100mm, according to the indicated markings. The width of the strip is 10mm and has a 3M self-adhesive backing to adhere to the desired surface.
Recommended use
Indoor lighting
Illumination of showcases, shelves and shop windows
Indoor decorative lighting
Indoor architectural lighting
Any assembly that requires long runs at low voltage.
Lighting of large illuminated signs.
Product features:
|
Please note that some technical characteristics such as power or efficacy may vary depending on the colour temperature of light. For further details, please refer to the attached "Test Reports" in the "Downloads" section or contact our sales advisors.
LED Strip 24V-DC - 15W/m - Monochrome - 10mm - IP20 - 30 metres - 120 LED/m - 10cm cut
