{"product_id":"tubo-led-t8-150cm-24w-con-sensor-microondas-blanco-6000k-cristal-opal","title":"LED Tube T8 150cm 24W with microwave sensor white 6000K opal glass","description":"\u003ch2\u003e150cm 24W microwave proximity sensor LED tube T8 cool white 6000K opal glass\u003c\/h2\u003e \u003cp\u003eThe \u003cstrong\u003eT8 LED tube with\u003c\/strong\u003e microwave proximity \u003cstrong\u003esensor\u003c\/strong\u003e integrates presence and proximity sensor, by which, when an object or person approaches at a distance of approx. 6-10 meters, the \u003cstrong\u003emicrowave sensor\u003c\/strong\u003e detects it and operates the tube at maximum power. As soon as the \u003cstrong\u003eLED tube\u003c\/strong\u003e leaves the radius of action, after 45 seconds, it lowers its luminosity to 30% of the total, offering a more than sufficient courtesy light with minimum consumption.\u003c\/p\u003e \u003cp\u003eThe number of starts does not affect the life of the tube, 25,000 hours.\u003c\/p\u003e \u003cp\u003eIdeal for parking lots, basements, schools, offices, bathrooms, and any other area that needs lighting for a long period of time.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e \u003ch2\u003eConsiderations to take into account with the LED T8 tube with microwave proximity sensor:\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDo not place any metal object in front of the sensor as it may alter its operation.\u003c\/li\u003e \u003cli\u003eEnsure a distance of at least 5 meters between tube and tube, as interference may occur between them.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eReplaces conventional 60 cm fluorescent tubes. \u003c\/strong\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003eAC input voltage 230V\u003c\/li\u003e \u003cli\u003eConstant operation in standby mode at 30% of its power.\u003c\/li\u003e \u003cli\u003eMicrowave sensor range: 6-10 meters\u003c\/li\u003e \u003cli\u003eHigh power factor up to 0.98\u003c\/li\u003e \u003cli\u003eWide opening angle (180º)\u003c\/li\u003e \u003cli\u003eGlare-free opal coverage \u003c\/li\u003e \u003cli\u003eShort-circuit and overheating protection\u003c\/li\u003e \u003cli\u003eIncluding starter bridge\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003c\/p\u003e \u003ch4\u003eInstallation in ferromagnetic ballasts:\u003c\/h4\u003e \u003cp\u003e\u003cstrong\u003eSTEP 1:\u003c\/strong\u003e Turn off the light at the main switchboard and verify that no electric current is coming.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSTEP 2:\u003c\/strong\u003e Remove the old tube and then the starter.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSTEP 3\u003c\/strong\u003e: Put in the new LED starter bridge (included with each tube).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSTEP 4 \u003c\/strong\u003e: Remove the capacitor (to avoid power surges).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSTEP 5\u003c\/strong\u003e: Install the new LED tube.\u003c\/p\u003e \u003ch4\u003eInstallation in electronic ballasts:\u003c\/h4\u003e \u003cp\u003e\u003cstrong\u003eSTEP 1:\u003c\/strong\u003e Turn off the light at the main electrical panel and verify that no electric current is coming.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSTEP 2:\u003c\/strong\u003e Remove the old tube (in this case there is no starter, since it is incorporated inside the electronic ballast).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSTEP 3:\u003c\/strong\u003e Disconnect the cables that enter the electronic ballast (no need to remove it, just disconnect it electrically).\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSTEP 4:\u003c\/strong\u003e Choose one of the 2 tube holders to connect its 2 wires directly to the mains.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eSTEP 5:\u003c\/strong\u003e We recommend marking the lamp holder where the connection has been made to facilitate the installation of the LED tube.\u003c\/p\u003e \u003cp\u003e\u003c\/p\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003eIf the installation contains a capacitor bank, consult your specialized technician.\u003c\/strong\u003e\u003c\/li\u003e \u003c\/ul\u003e","brand":"Barcelona LED","offers":[{"title":"Default Title","offer_id":47049375252635,"sku":"B4011-R-150BF","price":16.45,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0205\/6091\/files\/23262.jpg?v=1756410931","url":"https:\/\/www.barcelonaled.com\/en-gr\/products\/led-tube-t8-150cm-24w-with-microwave-sensor-white-6000k-opal-glass","provider":"Barcelona Led","version":"1.0","type":"link"}