This LED strip profile for corners is placed at the junction between the ceiling and a plasterboard wall, projecting light onto the wall and creating a uniform wash of light. Once installed, the profile blends seamlessly into the architecture, leaving only the light strip visible.

Main advantages

• Bathing effect: illuminates the wall at a graze and enhances textures and volumes.
• Total integration: perforated fins that are fixed with putty for a flush finish.
• Spotless light: white diffuser that hides the LEDs and softens the light.
• 2m format: profile and diffuser of equal length.

Where is it used?

In living rooms, bedrooms, hallways, reception areas, hotels and shops with plasterboard ceilings or partitions, where indirect perimeter lighting and a clean architectural finish are desired.

Which LED strip can I mount on this profile?

The inner channel is 8.90 mm wide, so it accommodates LED strips up to 6 mm wide . For a seamless, spotless wall lighting effect, high-density COB or SMD strips provide the best results.

How do I install it?

It is placed in the corner before finishing, fixing the perforated fins to the ceiling and wall. Then, filler or plaster is applied over the fins, sanded, painted, and finally the LED strip and diffuser are inserted by pressing them into place.

What are its dimensions and how much space does it need?

The profile measures 83 mm in total width by 47.79 mm in height. This space must be provided for at the ceiling-wall junction to allow access for cabling and the power supply.

Why choose a wall-mounted floodlight over a direct line of light?

The floodlight directs light onto the wall instead of into the space, thus avoiding glare, visually expanding the room, and creating a warmer, more enveloping ambient lighting.