{"product_id":"sensor-de-presencia-pir-estanco-de-superficie-360o-ip54","title":"Waterproof PIR presence sensor surface 360º IP54","description":"\u003ch2\u003eIP54 watertight PIR surface presence sensor\u003c\/h2\u003e \u003cp\u003eThe presence and brightness sensor is the perfect device for the correct energy management of lighting installations, since it can control the switching on and off with its proper pre-configuration. \u003cstrong\u003eIts high resolution and precision allow to detect minimal movements\u003c\/strong\u003e, making the presence sensor the ideal element in those areas where movements are reduced but it is necessary to keep the light on, such as in offices, school classrooms, bathrooms, libraries, etc.\u003c\/p\u003e \u003ch3\u003eMain functions of the waterproof surface presence sensor\u003c\/h3\u003e \u003cp\u003eThe presence sensor \u003cstrong\u003edetects day and night\u003c\/strong\u003e: The user can adjust the operation of the sensor for each type of ambient lighting. If we adjust the LUX function towards the sun (day mode), it will work both day and night. If, on the other hand, it is set to the moon (night mode), it will work only at night. The degree of sensitivity will depend on the setting of the LUX function, with 10 lux being the minimum in night mode and 2000 lux the maximum in day mode.\u003c\/p\u003e \u003cp style=\"margin-top:1em;\"\u003e\u003c\/p\u003e \u003cp\u003eThe length of time the sensor keeps the light on can be adjusted with the TIME knob. If set to maximum, the sensor will activate the switch and the light will remain on for approx. 10 minutes after the last presence detection. If set to minimum, the light will turn off after approx. 10 seconds.\u003c\/p\u003e \u003cp style=\"margin-top:1em;\"\u003e\u003c\/p\u003e \u003cp\u003eThe SENS function allows us to adjust the sensitivity with respect to the detection distance, with \u003cstrong\u003e25 meters\u003c\/strong\u003e being \u003cstrong\u003ethe maximum\u003c\/strong\u003e, and 2 meters the minimum. This makes it the ideal solution in large rooms, being able to manage the lighting automatically \u003cstrong\u003ein spaces of more than 100 square meters\u003c\/strong\u003e in normal temperature conditions (around 25ºC).\u003c\/p\u003e \u003cp style=\"margin-top:1em;\"\u003e\u003c\/p\u003e \u003cp\u003eIts \u003cstrong\u003ewatertight design with IP54 degree of protection\u003c\/strong\u003e allows it to be installed outdoors and in wet areas, so it can also be used to illuminate porches, house entrances, patios and gardens.\u003c\/p\u003e \u003cp style=\"margin-top:1em;\"\u003e\u003c\/p\u003e \u003cp align=\"center\"\u003e\u003cimg src=\"https:\/\/www.barcelonaled.com\/img\/cms\/sensores%20led_%20movimiento%20y%20sol\/s2140\/Sin%20t%C3%ADtulo-4.png\" alt=\"sensor de presencia\" width=\"30%\" height=\"30%\"\u003e\u003c\/p\u003e \u003ch3\u003eDifferences between a presence sensor and a motion sensor\u003c\/h3\u003e \u003cp\u003eMotion sensors activate the switch when motion is detected within the selected detection zone and ambient light levels fall below the threshold selected with the LUX function. After the time has elapsed, the switch is deactivated and the lights are switched off.\u003c\/p\u003e \u003cp style=\"margin-top:1em;\"\u003e\u003c\/p\u003e \u003cp\u003eIn contrast, \u003cstrong\u003epresence sensors are much more sensitive and accurate\u003c\/strong\u003e. While a motion sensor detects a person walking, the movement of an arm, etc., a presence sensor is capable of detecting the movement of a finger, a sheet of paper, a head movement, etc. \u003c\/p\u003e \u003cp style=\"margin-top:1em;\"\u003e\u003c\/p\u003e \u003cp\u003eIf you want to install a detector in a sedentary area, such as offices, classrooms or libraries, \u003cstrong\u003ewhere there are no large movements for long\u003c\/strong\u003e periods of time but require constant lighting without cuts, the perfect solution is the installation of a presence sensor. If, on the other hand, you install a motion sensor, to achieve this functionality you would have to set the time function to maximum, in order to wait for detectable movements to occur within that period of time. This would reduce the efficiency and purpose of the sensor. \u003c\/p\u003e \u003ch3\u003eInstallation of the surface watertight presence sensor\u003c\/h3\u003e \u003cp\u003eInstallation is very simple:\u003c\/p\u003e \u003cul\u003e\u003cli\u003eDisconnect the power supply from the line to avoid accidents.\u003c\/li\u003e \u003cli\u003eRemove the front casing by pressing the sensor slightly backwards. The configuration panel will be exposed.\u003c\/li\u003e \u003cli\u003eProgram the TIME, LUX and SENS functions according to your needs.\u003c\/li\u003e \u003cli\u003eConnect the power supply to the power strip on the back, following the wiring diagram.\u003c\/li\u003e \u003cli\u003eIf you want to mount the presence sensor in humid environments or outdoors, you must adequately protect the terminal strip. We recommend \u003cstrong\u003e\u003ca href=\"https:\/\/www.barcelonaled.com\/componentes-y-accesorios-led\/regletas-y-conectores\/caja-de-empalmes-estanca-gel-box-45x45x30-ip68-con-gel-aislante-conexiones-no-incl.html\"\u003eRAYTECH products, watertight junction boxes protected with gel\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/li\u003e \u003cli\u003eScrew the sensor against the wall with the fasteners included in the box.\u003c\/li\u003e \u003cli\u003ePlace the front casing and the product is ready for use.\u003c\/li\u003e \u003c\/ul\u003e\u003cp style=\"margin-top:1em;\"\u003e\u003c\/p\u003e \u003cp align=\"center\"\u003e\u003c\/p\u003e \u003ch3\u003eTechnical characteristics of the presence sensor\u003c\/h3\u003e \u003cul\u003e\u003cli\u003ePower supply: 220-240V-AC\u003c\/li\u003e \u003cli\u003eFrequency: 50Hz\u003c\/li\u003e \u003cli\u003eAmbient light: from 10 to 2000 LUX (adjustable)\u003c\/li\u003e \u003cli\u003eActuation time: minimum 10 seconds (+\/-3 sec.) maximum 10 minutes (+\/-3min.)\u003c\/li\u003e \u003cli\u003eMaximum load: 2000W\/10A\u003c\/li\u003e \u003cli\u003eDetection distance: from 2 to 25 meters maximum in normal temperature conditions\u003c\/li\u003e \u003cli\u003eDetection range: 360º.\u003c\/li\u003e \u003cli\u003eOperating temperature: from -20ºC to +40ºC with relative humidity below 93%.\u003c\/li\u003e \u003cli\u003eRecommended installation height: from 2.2 meters up to 4 meters\u003c\/li\u003e \u003cli\u003ePower consumption: \u003c0.9W\u003c\/li\u003e \u003cli\u003eMotion detection speed: 0.6 to 1.5 meters\/second.\u003c\/li\u003e \u003c\/ul\u003e\u003ch3\u003eRecommendations\u003c\/h3\u003e \u003cul\u003e\u003cli\u003eDespite the simplicity of the product's installation, we recommend that it be installed by a specialist, electrician or person familiar with electrical installations and their risks.\u003c\/li\u003e \u003cli\u003eDisconnect the power supply at all times during assembly, disassembly and handling or configuration of the device.\u003c\/li\u003e \u003cli\u003eMake sure that the device is receiving the correct voltage.\u003c\/li\u003e \u003cli\u003eCheck that the power connected to the circuit controlling the sensor does not exceed the maximum allowed.\u003c\/li\u003e \u003cli\u003eDo not install anything in front of or near the sensor that would prevent proper motion detection.\u003c\/li\u003e \u003cli\u003eCheck that the ambient temperature of the environment does not exceed 40ºC.\u003c\/li\u003e \u003cli\u003eCheck that there are no elements that vary the temperature abruptly, such as air conditioning, heating, stoves, etc.\u003c\/li\u003e \u003cli\u003eMake sure to place the sensor within the recommended height range.\u003c\/li\u003e \u003c\/ul\u003e","brand":"Barcelona LED","offers":[{"title":"Default Title","offer_id":47049389277339,"sku":"S3140","price":11.59,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0705\/0205\/6091\/files\/7639.jpg?v=1755971688","url":"https:\/\/www.barcelonaled.com\/en-cz\/products\/pir-motion-sensor-surface-mounted-360o-ip54","provider":"Barcelona Led","version":"1.0","type":"link"}